搜索
imgboxbg

News Center

Exciting information for you

科思
/
/
What are the installation methods for marine lights? Its installation skills are also told to you together!
NEWS

News Center

What are the installation methods for marine lights? Its installation skills are also told to you together!

(Summary description)  If we want to illuminate on the boat, we need to use marine lamps, but the specific installation method of the lamps can be selected by ourselves. What are the installation methods? There are mainly ceiling type, embedded type, suspension type, wall type, branch type combination type, and embedded wall type, etc., and if you want to install it better, you can also use the corresponding installation skills. In the article, the editor will give you a detailed introduction to the classification of marine lighting installation methods and its installation skills.     Classification of installation methods of marine lamps:   1. Ceiling type   Adsorbed on the ceiling, it is suitable for buildings with smooth ceilings and low rooms. This installation method often has a brighter ceiling, but it is easy to generate glare, and the utilization rate of light flux is not high.   2. Embedded          Most or all of the marine lamps are embedded in the ceiling, and only the light-emitting surface is exposed. Suitable for low rooms. Generally speaking, the ceiling is dark and the lighting efficiency is not high. If the ceiling reflection is relatively high, the lighting effect can be improved.   3. Suspended   This marine light is hung from the ceiling. According to the different hanging materials, it can be divided into line hanging type, chain hanging type and pipe hanging type. This marine luminaire is close to the work surface and is often used for general lighting in buildings.   4. Wall type   This marine light fixture is attached to the wall. Wall lamps cannot be used as general lighting marine lamps, but can only be used as auxiliary lighting with decorative effects. Due to the low installation height, it is easy to become a glare source, so a low-power light source is mostly used.   5. Branch type combination   This kind of marine lamps is composed of multi-branch lamps and lanterns into a certain pattern, commonly known as lanterns. Generally hanging or ceiling type, mainly decorative lighting. Large lanterns are often used in large building halls, and small lanterns can also be used in hotels, conference halls, etc.   6. Embedded wall type   Most or all of the marine lamps are embedded in the wall or on the floor, and only a small luminous surface is exposed. It is often used as a floor lamp, used as a night lamp indoors, or as a late-night lighting lamp for corridors and stairs to avoid affecting the rest of others at night.     Installation skills of marine lamps:    1. Don’t just install a single lighting source in the center. In order to improve the lighting of the galley, a multi-level lighting system composed of different marine lamps and light sources should be installed in the galley. 2. The installation location of marine lamps is also very important. Linear incandescent lamps or fluorescent lamps should be installed in the front part of the cabinet. In this way, part of the light from the lamps is directed towards the tailgate, which is then reflected onto the console and then towards the center of the entire space. 3. If the space inside the boat is high enough, a transparent or translucent chandelier can be installed on the ceiling as a light source. The chandelier can not only provide excellent lighting, but also a good decorative item. 4. The important thing for the installation of marine lamps is to be firm. You can pull it by hand and feel it. The bottom cover of marine lamps should be close to the ceiling and should not be shaken. 5. If it is a chandelier, there will be wires extending from the top to the lamp head. It should be noted that this wire should not be taut, it should be loosely wrapped around the tie rod and go down, otherwise this long-term taut wire will be very easy in the future. Something went wrong.     The above is the classification of the installation methods of marine lamps and its installation skills. I hope that the introduction of the editor can help you better understand this industry!

What are the installation methods for marine lights? Its installation skills are also told to you together!

(Summary description)  If we want to illuminate on the boat, we need to use marine lamps, but the specific installation method of the lamps can be selected by ourselves. What are the installation methods? There are mainly ceiling type, embedded type, suspension type, wall type, branch type combination type, and embedded wall type, etc., and if you want to install it better, you can also use the corresponding installation skills. In the article, the editor will give you a detailed introduction to the classification of marine lighting installation methods and its installation skills.

 



 

Classification of installation methods of marine lamps:

  1. Ceiling type

  Adsorbed on the ceiling, it is suitable for buildings with smooth ceilings and low rooms. This installation method often has a brighter ceiling, but it is easy to generate glare, and the utilization rate of light flux is not high.

  2. Embedded  

       Most or all of the marine lamps are embedded in the ceiling, and only the light-emitting surface is exposed. Suitable for low rooms. Generally speaking, the ceiling is dark and the lighting efficiency is not high. If the ceiling reflection is relatively high, the lighting effect can be improved.

  3. Suspended

  This marine light is hung from the ceiling. According to the different hanging materials, it can be divided into line hanging type, chain hanging type and pipe hanging type. This marine luminaire is close to the work surface and is often used for general lighting in buildings.

  4. Wall type

  This marine light fixture is attached to the wall. Wall lamps cannot be used as general lighting marine lamps, but can only be used as auxiliary lighting with decorative effects. Due to the low installation height, it is easy to become a glare source, so a low-power light source is mostly used.

  5. Branch type combination

  This kind of marine lamps is composed of multi-branch lamps and lanterns into a certain pattern, commonly known as lanterns. Generally hanging or ceiling type, mainly decorative lighting. Large lanterns are often used in large building halls, and small lanterns can also be used in hotels, conference halls, etc.

  6. Embedded wall type

  Most or all of the marine lamps are embedded in the wall or on the floor, and only a small luminous surface is exposed. It is often used as a floor lamp, used as a night lamp indoors, or as a late-night lighting lamp for corridors and stairs to avoid affecting the rest of others at night.

 



 

Installation skills of marine lamps:

  

1. Don’t just install a single lighting source in the center. In order to improve the lighting of the galley, a multi-level lighting system composed of different marine lamps and light sources should be installed in the galley.

2. The installation location of marine lamps is also very important. Linear incandescent lamps or fluorescent lamps should be installed in the front part of the cabinet. In this way, part of the light from the lamps is directed towards the tailgate, which is then reflected onto the console and then towards the center of the entire space.

3. If the space inside the boat is high enough, a transparent or translucent chandelier can be installed on the ceiling as a light source. The chandelier can not only provide excellent lighting, but also a good decorative item.

4. The important thing for the installation of marine lamps is to be firm. You can pull it by hand and feel it. The bottom cover of marine lamps should be close to the ceiling and should not be shaken.

5. If it is a chandelier, there will be wires extending from the top to the lamp head. It should be noted that this wire should not be taut, it should be loosely wrapped around the tie rod and go down, otherwise this long-term taut wire will be very easy in the future. Something went wrong.



 

  The above is the classification of the installation methods of marine lamps and its installation skills. I hope that the introduction of the editor can help you better understand this industry!

Information

  If we want to illuminate on the boat, we need to use marine lamps, but the specific installation method of the lamps can be selected by ourselves. What are the installation methods? There are mainly ceiling type, embedded type, suspension type, wall type, branch type combination type, and embedded wall type, etc., and if you want to install it better, you can also use the corresponding installation skills. In the article, the editor will give you a detailed introduction to the classification of marine lighting installation methods and its installation skills.

 

 

Classification of installation methods of marine lamps:

  1. Ceiling type

  Adsorbed on the ceiling, it is suitable for buildings with smooth ceilings and low rooms. This installation method often has a brighter ceiling, but it is easy to generate glare, and the utilization rate of light flux is not high.

  2. Embedded  

       Most or all of the marine lamps are embedded in the ceiling, and only the light-emitting surface is exposed. Suitable for low rooms. Generally speaking, the ceiling is dark and the lighting efficiency is not high. If the ceiling reflection is relatively high, the lighting effect can be improved.

  3. Suspended

  This marine light is hung from the ceiling. According to the different hanging materials, it can be divided into line hanging type, chain hanging type and pipe hanging type. This marine luminaire is close to the work surface and is often used for general lighting in buildings.

  4. Wall type

  This marine light fixture is attached to the wall. Wall lamps cannot be used as general lighting marine lamps, but can only be used as auxiliary lighting with decorative effects. Due to the low installation height, it is easy to become a glare source, so a low-power light source is mostly used.

  5. Branch type combination

  This kind of marine lamps is composed of multi-branch lamps and lanterns into a certain pattern, commonly known as lanterns. Generally hanging or ceiling type, mainly decorative lighting. Large lanterns are often used in large building halls, and small lanterns can also be used in hotels, conference halls, etc.

  6. Embedded wall type

  Most or all of the marine lamps are embedded in the wall or on the floor, and only a small luminous surface is exposed. It is often used as a floor lamp, used as a night lamp indoors, or as a late-night lighting lamp for corridors and stairs to avoid affecting the rest of others at night.

 

 

Installation skills of marine lamps:

  

1. Don’t just install a single lighting source in the center. In order to improve the lighting of the galley, a multi-level lighting system composed of different marine lamps and light sources should be installed in the galley.

2. The installation location of marine lamps is also very important. Linear incandescent lamps or fluorescent lamps should be installed in the front part of the cabinet. In this way, part of the light from the lamps is directed towards the tailgate, which is then reflected onto the console and then towards the center of the entire space.

3. If the space inside the boat is high enough, a transparent or translucent chandelier can be installed on the ceiling as a light source. The chandelier can not only provide excellent lighting, but also a good decorative item.

4. The important thing for the installation of marine lamps is to be firm. You can pull it by hand and feel it. The bottom cover of marine lamps should be close to the ceiling and should not be shaken.

5. If it is a chandelier, there will be wires extending from the top to the lamp head. It should be noted that this wire should not be taut, it should be loosely wrapped around the tie rod and go down, otherwise this long-term taut wire will be very easy in the future. Something went wrong.

 

  The above is the classification of the installation methods of marine lamps and its installation skills. I hope that the introduction of the editor can help you better understand this industry!

Keyword:

Scan the QR code to read on your phone

What are the characteristics of LED roadway lights? Do you know the installation method and precautions? Take a look!

What are the characteristics of LED roadway lights? Do you know the installation method and precautions? Take a look!

  As people's requirements for lamps are getting higher and higher, a new type of lamps called LED lamps are favored by people. LED is a kind of light-emitting diode. As a light source for illuminants, it has high light efficiency and long life. To achieve multi-purpose lighting, and softened, it will not cause dazzling or other uncomfortable reactions, so many public areas will use this kind of light, such as LED roadway lights, because there are many people on the road, so it is necessary to To install soft lamps that will not hurt the eyes, what are the characteristics of LED road lights? Do you know its installation methods and precautions? Let's follow the editor to learn about it.    Features of LED roadway lights: 1. The color purity of LED roadway lamps is high; at present, LED products cover almost the entire visible spectrum range, and the color purity is high. 2. LED roadway lamps have a long life. The actual life of LED is more than 50,000 hours, which is several times or even dozens of times that of general light sources. 3. The light source of LED roadway lamps does not contain mercury, and the light beam does not contain ultraviolet rays. 4. It is solid luminescence, good shock resistance, firm and reliable. 5. It also has the characteristics of energy saving, economical and maintenance-free. 6. LED has strong luminous directionality, high luminous flux utilization rate, and small size, which is easy to design and control light intensity distribution of LED lamps. 7. LED roadway lamps can be powered by DC low voltage, which is safe and reliable. 8. The LED is not limited by the start-up temperature, it can be started temporarily, usually a few ms, and can temporarily achieve full luminous flux output.   Installation method and precautions of LED roadway lights: 1. Installation method: 1. First, determine the installation position and method of the lamps according to the actual needs of the work site, and then prepare the corresponding length of Φ8~Φ14 mm three-core cables according to the distance from the lamps to the power contacts. 2. Open the set screw on the side of the upper cover of the lamp, then loosen the compression nut of the cable inlet of the lamp, open the upper cover, and lead the power cables through the compression nut to the internal terminal, and connect according to the method shown in the figure. Fix it, and then tighten the cable compression nut and the upper cover of the lamp. 3. The LED roadway lights are enclosure-free. If the lamps themselves are not bright, generally communicate with the manufacturer for direct replacement or return to the factory for maintenance. 2. Notes: 1. The power supply must be cut off before dismantling the lamp. 2. It is strictly forbidden to open it with electricity. 3. During use, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the center of the transparent part has a high temperature and should not be touched. 4. When installing lamps, the lamps should be safely grounded nearby. The above are the characteristics of LED roadway lights, as well as its installation methods and precautions. Relevant staff must pay attention to the problems during installation to ensure their personal safety.
LED explosion-proof floodlight

LED explosion-proof floodlight

LED explosion-proof floodlight, as a type of LED explosion-proof light, its core purpose is to ensure that in environments with explosive mixtures, the lamp can prevent sparks or thermal effects, thereby avoiding the ignition of surrounding explosive gases, dust, or gas.
LED Tunnel Light: A Bright Guardian of Coal Mine Underground

LED Tunnel Light: A Bright Guardian of Coal Mine Underground

In coal mines, safety always comes first. In this challenging environment, we constantly face the threat of explosive gas mixtures such as methane and coal dust. However, there is a product like a brilliant star that illuminates our work path and safeguards our safety - that is LED alley lights.

Copyright © 2021 Nanjing Tansuo Optoelectronics Co., Ltd. All rights reserved     Powered by: www.300.cn  |   苏ICP备07006102号-1