搜索
imgboxbg

News Center

Exciting information for you

科思
/
/
Replacement method and advantages and disadvantages of roadway light tubes
NEWS

News Center

Replacement method and advantages and disadvantages of roadway light tubes

(Summary description)   The roadway light tube is a kind of LED lamp, which can replace the T5 fluorescent tube. It is very energy-saving and has high brightness. It is widely used in many industries. However, when the roadway light tube fails, it is difficult for us to replace the T5 fluorescent tube, because the roadway light tube is very thin. So, is there any way that we can easily replace the T5 fluorescent tube?      Four ways to replace T5 fluorescent tube with roadway light tube        The first type: split roadway light tube, also known as single-tube roadway light tube, such as 1.2 meters, the length is 1149, the actual length of 1.5 meters is 1449mm, the actual length of 0.6 meters is 549, the plug is G5.3, and divided into two kinds. An external power supply, the lamp itself is divided into polarities. If components are added, the polarity can also be achieved. The power supply is placed in the bracket, and the bracket needs to be modified. A built-in power supply, the power supply is designed on the aluminum substrate, and the power supply is characterized by narrow voltage. Generally between 200-230v, it can also meet the requirements.       The second type: T5 integrated LED lamp, this is a combination of lamp and bracket. When installing, you only need to fix the metal clip. The advantage is that the lamp bracket is saved, and the power supply can be built in and installed. Extremely simple and flexible installation position. Generally new clothes can be considered.      The third type: T8 to T5 led fluorescent lamp, simply put, the body of T8, the plug of T5, and the power supply can also be built-in. Realize direct replacement of T5 fluorescent lamps.       The fourth type: external power supply type, you can directly use a T5 aluminum-plastic tube with a diameter of 16mm, which is directly connected to the external power supply to push the LED tube to work and emit light. Note that this kind of lamp has polarity. If you find that the lamp is not bright, you only need to switch the two ends of the lamp to switch the polarity, and the lamp will light up.      There are three ways to replace the T5 fluorescent tube with the roadway light tube. It should be replaced according to the actual situation. Generally, it is better to replace it with a split or T8 turn roadway light tube. If it is newly installed, the integrated T5led fluorescent tube is generally used. It can be mounted or hoisted, and it is also economical in terms of cost.        Advantages and disadvantages of roadway lights        First of all, T5LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will evaporate into the atmosphere, thereby polluting the environment, while LED fluorescent lamps can be very good. It is one of the recognized green light sources.        Secondly, T5LED fluorescent lamps are cold light sources and do not emit a lot of heat like traditional lamps. It can basically convert all electrical energy into light energy without causing waste of energy, which is very economical.        Again, the T5LED fluorescent lamp is a very quiet energy-saving lamp, which does not produce noise like traditional fluorescent lamps, and is very suitable for environments that require quietness, such as libraries, offices and the like. It can also protect the eyes very well, start very fast, and will not flicker, which is very beneficial to our health.         Also, because the T5LED fluorescent lamp is a green and environmentally friendly lamp, it does not produce ultraviolet light, infrared light and other radiation, does not contain mercury and other harmful substances, and generates less heat, which well avoids the situation of mosquitoes surrounding the lamp source. , which creates a relatively clean environment for the interior.        Finally, the T5LED fluorescent lamp has a long service life, its power consumption is less than one-third of the traditional fluorescent lamp, but the brightness is consistent with the traditional fluorescent lamp. Generally speaking, the normal service life is more than 30,000 hours, and there is no need to replace it for long-term use, which reduces labor costs invisibly, which is very suitable for some occasions where it is inconvenient to replace lamps. Of course, the color of LED fluorescent tubes is very rich, and lamps of various luminous colors can be made to meet the needs of different occasions.

Replacement method and advantages and disadvantages of roadway light tubes

(Summary description)
  The roadway light tube is a kind of LED lamp, which can replace the T5 fluorescent tube. It is very energy-saving and has high brightness. It is widely used in many industries. However, when the roadway light tube fails, it is difficult for us to replace the T5 fluorescent tube, because the roadway light tube is very thin. So, is there any way that we can easily replace the T5 fluorescent tube?



 

  
Four ways to replace T5 fluorescent tube with roadway light tube


       The first type: split roadway light tube, also known as single-tube roadway light tube, such as 1.2 meters, the length is 1149, the actual length of 1.5 meters is 1449mm, the actual length of 0.6 meters is 549, the plug is G5.3, and divided into two kinds. An external power supply, the lamp itself is divided into polarities. If components are added, the polarity can also be achieved. The power supply is placed in the bracket, and the bracket needs to be modified. A built-in power supply, the power supply is designed on the aluminum substrate, and the power supply is characterized by narrow voltage. Generally between 200-230v, it can also meet the requirements.


      The second type: T5 integrated LED lamp, this is a combination of lamp and bracket. When installing, you only need to fix the metal clip. The advantage is that the lamp bracket is saved, and the power supply can be built in and installed. Extremely simple and flexible installation position. Generally new clothes can be considered.


     The third type: T8 to T5 led fluorescent lamp, simply put, the body of T8, the plug of T5, and the power supply can also be built-in. Realize direct replacement of T5 fluorescent lamps.


      The fourth type: external power supply type, you can directly use a T5 aluminum-plastic tube with a diameter of 16mm, which is directly connected to the external power supply to push the LED tube to work and emit light. Note that this kind of lamp has polarity. If you find that the lamp is not bright, you only need to switch the two ends of the lamp to switch the polarity, and the lamp will light up.


     There are three ways to replace the T5 fluorescent tube with the roadway light tube. It should be replaced according to the actual situation. Generally, it is better to replace it with a split or T8 turn roadway light tube. If it is newly installed, the integrated T5led fluorescent tube is generally used. It can be mounted or hoisted, and it is also economical in terms of cost.


 



 

  
Advantages and disadvantages of roadway lights


       First of all, T5LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will evaporate into the atmosphere, thereby polluting the environment, while LED fluorescent lamps can be very good. It is one of the recognized green light sources.


       Secondly, T5LED fluorescent lamps are cold light sources and do not emit a lot of heat like traditional lamps. It can basically convert all electrical energy into light energy without causing waste of energy, which is very economical.


       Again, the T5LED fluorescent lamp is a very quiet energy-saving lamp, which does not produce noise like traditional fluorescent lamps, and is very suitable for environments that require quietness, such as libraries, offices and the like. It can also protect the eyes very well, start very fast, and will not flicker, which is very beneficial to our health.


        Also, because the T5LED fluorescent lamp is a green and environmentally friendly lamp, it does not produce ultraviolet light, infrared light and other radiation, does not contain mercury and other harmful substances, and generates less heat, which well avoids the situation of mosquitoes surrounding the lamp source. , which creates a relatively clean environment for the interior.


       Finally, the T5LED fluorescent lamp has a long service life, its power consumption is less than one-third of the traditional fluorescent lamp, but the brightness is consistent with the traditional fluorescent lamp. Generally speaking, the normal service life is more than 30,000 hours, and there is no need to replace it for long-term use, which reduces labor costs invisibly, which is very suitable for some occasions where it is inconvenient to replace lamps. Of course, the color of LED fluorescent tubes is very rich, and lamps of various luminous colors can be made to meet the needs of different occasions.


Information
  The roadway light tube is a kind of LED lamp, which can replace the T5 fluorescent tube. It is very energy-saving and has high brightness. It is widely used in many industries. However, when the roadway light tube fails, it is difficult for us to replace the T5 fluorescent tube, because the roadway light tube is very thin. So, is there any way that we can easily replace the T5 fluorescent tube?
njtansuo.com
 
  

Four ways to replace T5 fluorescent tube with roadway light tube


       The first type: split roadway light tube, also known as single-tube roadway light tube, such as 1.2 meters, the length is 1149, the actual length of 1.5 meters is 1449mm, the actual length of 0.6 meters is 549, the plug is G5.3, and divided into two kinds. An external power supply, the lamp itself is divided into polarities. If components are added, the polarity can also be achieved. The power supply is placed in the bracket, and the bracket needs to be modified. A built-in power supply, the power supply is designed on the aluminum substrate, and the power supply is characterized by narrow voltage. Generally between 200-230v, it can also meet the requirements.


      The second type: T5 integrated LED lamp, this is a combination of lamp and bracket. When installing, you only need to fix the metal clip. The advantage is that the lamp bracket is saved, and the power supply can be built in and installed. Extremely simple and flexible installation position. Generally new clothes can be considered.


     The third type: T8 to T5 led fluorescent lamp, simply put, the body of T8, the plug of T5, and the power supply can also be built-in. Realize direct replacement of T5 fluorescent lamps.


      The fourth type: external power supply type, you can directly use a T5 aluminum-plastic tube with a diameter of 16mm, which is directly connected to the external power supply to push the LED tube to work and emit light. Note that this kind of lamp has polarity. If you find that the lamp is not bright, you only need to switch the two ends of the lamp to switch the polarity, and the lamp will light up.


     There are three ways to replace the T5 fluorescent tube with the roadway light tube. It should be replaced according to the actual situation. Generally, it is better to replace it with a split or T8 turn roadway light tube. If it is newly installed, the integrated T5led fluorescent tube is generally used. It can be mounted or hoisted, and it is also economical in terms of cost.

 

njtansuo.com
 
  

Advantages and disadvantages of roadway lights


       First of all, T5LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will evaporate into the atmosphere, thereby polluting the environment, while LED fluorescent lamps can be very good. It is one of the recognized green light sources.


       Secondly, T5LED fluorescent lamps are cold light sources and do not emit a lot of heat like traditional lamps. It can basically convert all electrical energy into light energy without causing waste of energy, which is very economical.


       Again, the T5LED fluorescent lamp is a very quiet energy-saving lamp, which does not produce noise like traditional fluorescent lamps, and is very suitable for environments that require quietness, such as libraries, offices and the like. It can also protect the eyes very well, start very fast, and will not flicker, which is very beneficial to our health.


        Also, because the T5LED fluorescent lamp is a green and environmentally friendly lamp, it does not produce ultraviolet light, infrared light and other radiation, does not contain mercury and other harmful substances, and generates less heat, which well avoids the situation of mosquitoes surrounding the lamp source. , which creates a relatively clean environment for the interior.


       Finally, the T5LED fluorescent lamp has a long service life, its power consumption is less than one-third of the traditional fluorescent lamp, but the brightness is consistent with the traditional fluorescent lamp. Generally speaking, the normal service life is more than 30,000 hours, and there is no need to replace it for long-term use, which reduces labor costs invisibly, which is very suitable for some occasions where it is inconvenient to replace lamps. Of course, the color of LED fluorescent tubes is very rich, and lamps of various luminous colors can be made to meet the needs of different occasions.

Scan the QR code to read on your phone

What are the characteristics of LED roadway lights? Do you know the installation method and precautions? Take a look!

What are the characteristics of LED roadway lights? Do you know the installation method and precautions? Take a look!

  As people's requirements for lamps are getting higher and higher, a new type of lamps called LED lamps are favored by people. LED is a kind of light-emitting diode. As a light source for illuminants, it has high light efficiency and long life. To achieve multi-purpose lighting, and softened, it will not cause dazzling or other uncomfortable reactions, so many public areas will use this kind of light, such as LED roadway lights, because there are many people on the road, so it is necessary to To install soft lamps that will not hurt the eyes, what are the characteristics of LED road lights? Do you know its installation methods and precautions? Let's follow the editor to learn about it.    Features of LED roadway lights: 1. The color purity of LED roadway lamps is high; at present, LED products cover almost the entire visible spectrum range, and the color purity is high. 2. LED roadway lamps have a long life. The actual life of LED is more than 50,000 hours, which is several times or even dozens of times that of general light sources. 3. The light source of LED roadway lamps does not contain mercury, and the light beam does not contain ultraviolet rays. 4. It is solid luminescence, good shock resistance, firm and reliable. 5. It also has the characteristics of energy saving, economical and maintenance-free. 6. LED has strong luminous directionality, high luminous flux utilization rate, and small size, which is easy to design and control light intensity distribution of LED lamps. 7. LED roadway lamps can be powered by DC low voltage, which is safe and reliable. 8. The LED is not limited by the start-up temperature, it can be started temporarily, usually a few ms, and can temporarily achieve full luminous flux output.   Installation method and precautions of LED roadway lights: 1. Installation method: 1. First, determine the installation position and method of the lamps according to the actual needs of the work site, and then prepare the corresponding length of Φ8~Φ14 mm three-core cables according to the distance from the lamps to the power contacts. 2. Open the set screw on the side of the upper cover of the lamp, then loosen the compression nut of the cable inlet of the lamp, open the upper cover, and lead the power cables through the compression nut to the internal terminal, and connect according to the method shown in the figure. Fix it, and then tighten the cable compression nut and the upper cover of the lamp. 3. The LED roadway lights are enclosure-free. If the lamps themselves are not bright, generally communicate with the manufacturer for direct replacement or return to the factory for maintenance. 2. Notes: 1. The power supply must be cut off before dismantling the lamp. 2. It is strictly forbidden to open it with electricity. 3. During use, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the center of the transparent part has a high temperature and should not be touched. 4. When installing lamps, the lamps should be safely grounded nearby. The above are the characteristics of LED roadway lights, as well as its installation methods and precautions. Relevant staff must pay attention to the problems during installation to ensure their personal safety.
Pleased to obtain the safety mark certificate of mining products

Pleased to obtain the safety mark certificate of mining products

What are the requirements for landscape lighting? This arrangement can get better results!

What are the requirements for landscape lighting? This arrangement can get better results!

  Landscape lighting is designed and created artificially to make it more artistic or aesthetic under the action of lighting, so that ordinary night scenes are full of exotic cultural atmosphere. Landscape lights should be the same color as the environment. Using light for color design is one of the key technologies in architectural design to reflect architectural cultural characteristics, and it has great benefits for architectural lighting. So what are the requirements for landscape lighting? It's going to do it! Take a look!     What are the requirements for landscape lighting? 1. Some important public buildings, historical relics, commercial buildings, square sculptures, or some special road signs (LANDMARK), bridges or MRT stations and other transportation facilities can be landscaped at night, so that the city night scene can be illuminated in addition to neon lights. There are different colors. 2. After reasonable planning, highlighting the landmark buildings, illuminating the road network, the outline of the city can be seen at night. Every city has its own unique cultural atmosphere, and it must be designed in a targeted manner. It cannot blindly imitate and imitate. It is always the shadow of others and has no bright spot. 3. A complete lighting project should have changes in spring, summer, autumn and winter, not just some important festivals. This reflects the unique charm and cultural atmosphere of a city!     Landscape lighting to do this: 1. With the continuous development of urban planning and construction and the continuous improvement of high-tech levels, the economic development of cultural tourism industry lighting projects has enriched its connotation. The lighting project of the scenic spot not only stipulates the light intensity, chromaticity, color rendering index, and the visual impact of the natural environment, which is pleasing to the eye, but also changes with the change of the scenery. 2. It has important practical significance to ensure the normal operation of lighting equipment in major cities and achieve better lighting effects. It mainly includes scientific management methods and legal management. Using modern control technology to carry out scientific management, not only to ensure the lighting rate and equipment integrity rate, but also to be economical and practical to achieve better lighting effects. 3. The lighting design of the building lighting project should proceed from the aesthetic point of view of the project building. In the design plan, the facade of the main building and the sub-building should be defined, and different actual lighting effects should be used to clarify the project sequence. The practical effects of various aspect ratios and different distances are more abundant.     The above is what are the requirements for landscape lighting? What it wants to do, if you want to know more information, you can pay attention to our later article updates to learn. Note: Some pictures are from the Internet, if there is any infringement, please contact to delete!

contact us

No. 10 Kaicheng Road, Qilin Gate, Jiangning District, Nanjing City, Jiangsu Province, China

QR code

Scan it

Follow us

Copyright © 2021 Nanjing Tansuo Optoelectronics Co., Ltd. All rights reserved     Powered by: www.300.cn  |   苏ICP备07006102号-1