• Categories:Industry Information
• Author:
• Origin:
• Time of issue:2020-07-14 10:39
• Views:

(Summary description)　　When you go to the gas station to refuel, have you noticed that the lights of the gas station are different from the lights on the roadside, because the gas station uses LED lights, because the gas station is a special place, so the requirements for any facility are relatively high Be careful, there must be no security risks. So do you know what requirements need to be met when designing LED gas station lights? Mainly, it needs a high energy saving rate, good monochromaticity, good diffusion, soft light, high luminous efficiency, etc. The following article will introduce it in detail. In addition, do you know what factors need to be considered when purchasing LED gas station lights? Generally, it is necessary to consider the lightning protection ability, high temperature and cold resistance ability and waterproof ability. Design requirements for LED gas station lights: 1. LED gas station lights require a high energy-saving rate, and the effect is obvious. 2. LED gas station lights require ultra-high-power non-integrated chips with excellent technology. 3. It needs good monochromaticity, good diffusivity, soft light and high luminous efficiency. 4. LED gas station lights need cold light source, no heat radiation, no harmful metal mercury, and green environmental protection. 5. LED gas station lights must pass the national explosion-proof electrical product quality supervision and inspection center, pass the inspection, and issue relevant explosion-proof certificates. 6. The LED gas station light body is made of imported raw materials, with good impact resistance, surface oxidation treatment, and durability. 7. LED gas station lights are novel in design, elegant and beautiful, and have the characteristics of modern lighting. 8. LED gas station lights are easy to install and easy to adjust. Factors to consider when choosing LED gas station lights: The selection of LED gas station lights needs to consider the ability of lightning protection, high temperature and cold resistance and waterproof ability. The following is a detailed introduction. 1. Lightning protection capability As we all know, outdoor lightning strikes are very harmful to LED lights. There are usually several types of direct lightning strikes, conduction lightning, and induction lightning. Inductive lightning is the most common, and it also causes the greatest damage to LED lights, often generating 4KV or even higher voltages. A good LED lamp should have good lightning protection ability and follow relevant design standards. 2. High temperature and cold resistance In some areas, the outside temperature can be as high as 50°C, and when it is very low, it is often as low as minus 30°C, which requires LED lights to have a wide range of working ambient temperatures. 3. Waterproof ability Although there is a difference between rainproof and waterproof LED lights in the market, the protection capabilities are very different. The protection level of rainproof only requires IP65, while the protection level of waterproof requires IP67, which means that even if the LED lamp is immersed in water, it can be protected. Safe use, can avoid the impact of moisture, moisture, salt spray, etc. on the internal PCB circuit and components of the LED lamp. The above is a detailed introduction to the design requirements of LED gas station lights and the factors that need to be considered when selecting them. After reading the above content, you should have some understanding. Relevant gas station staff can refer to the above when choosing lights. The content is selected, I hope it can help everyone.