How to use safely LED alley lights and extend the lifespan of LED alley lights? This is a commonly overlooked issue. Casual use and occasional dusting of LED alley lights will significantly reduce their lifespan. Let's explore the maintenance and usage instructions for LED alley lights.

　　LED Alley Light Usage and Maintenance Methods:

　　1. After purchasing LED alley lights, don't rush to install them. Carefully read the installation instructions and follow the steps. Incorrect installation and use may lead to hazards.

　　2. During cleaning and maintenance, do not alter the structure of the alley light and do not arbitrarily replace any components. After maintenance, install the alley light directly, ensuring no parts are missing or incorrectly installed.

　　3. When using the alley lights, try to avoid frequent switching. The number of times an LED light can be switched on and off is about 1.8 times that of a regular fluorescent light, but frequent use will affect the lifespan of the internal electronic components and the alley light itself.

　　4. Do not wash LED alley lights with water. Usually, wiping with a damp cloth is sufficient. If accidentally exposed to water, wipe it dry immediately. Avoid wiping with a wet cloth after turning on the light.

　　LED Alley Light Usage Instructions:

　　1. Determine the installation location of the luminaire and ballast and the appropriate installation method based on the site environment and lighting needs. Prepare a litz wire of appropriate length based on the distance from the ballast to the 127V power contact.

　　2. Secure the luminaire and ballast in the designated installation location.

　　3. Tighten the fixing bolts with a socket wrench. Introduce one end of the three-core cable into the ballast through the ballast output port, connect each cable to the ballast's terminals, secure the three-core cable with the spring clip, and then tighten the locking nut.

　　4. Close the ballast compartment cover, tighten the fixing bolts, and connect the other end of the three-core cable to the 127V power supply to achieve illumination.

　　5. When replacing the bulb, first disconnect the power supply.

　　LED Alley Light Installation Precautions:

　　1. When installing and maintaining the luminaire, be sure to disconnect the power supply. Do not operate under power.

　　2. During use, a certain temperature rise on the surface of the luminaire is normal; the center temperature of the transparent components is very high, please do not touch.

　　3. If the external flexible cable or wire of the LED alley light is damaged, it should be replaced by the manufacturer, its service agent, or qualified personnel.

　　The above is the maintenance and usage instructions for LED alley lights. For more information, please feel free to contact us! Our company has years of experience and we look forward to your inquiry.

Telephone:18914779750

Fax: 025-84199977

E-mail:njtansuo@163.com