As people's requirements for lighting fixtures become increasingly high, a new type of lighting fixture called LED lights has gained popularity. LED is a light-emitting diode, which serves as a light source with high luminous efficiency and long lifespan. When combined with different reflectors, it can achieve multi-purpose lighting and is treated to soften the light, preventing glare or other discomfort. Therefore, many public areas use this type of light, such as LED corridor lights. Since there are many people coming and going on the roads, it is necessary to install soft lights that do not harm the eyes. So, what are the characteristics of LED road lights? Do you know their installation methods and precautions? Let's learn more about it together.

Characteristics of LED corridor lights:

1. LED corridor lights have high color purity; currently, LED products almost cover the entire visible spectrum range, and the color purity is high.

2. LED corridor lights have an extremely long lifespan. The actual lifespan of LEDs exceeds 50,000 hours, which is several times or even dozens of times that of general light sources.

3. The light source of LED corridor lights does not contain mercury, and the beam does not contain ultraviolet light.

4. It is a solid-state light source, with good shock resistance, sturdy and reliable.

5. It also has energy-saving, economical, and maintenance-free characteristics.

6. LEDs have strong light directionality, high luminous flux utilization, and are small in size, making it easy to design the appearance of LED fixtures and control light intensity distribution.

7. LED corridor lights can be powered by low-voltage direct current, which is safe and reliable.

8. LEDs are not limited by starting temperature, can start in a transient state, generally within a few milliseconds, and can achieve full luminous flux output in a transient state.

Installation methods and precautions for LED corridor lights:

1. Installation method:

First, determine the installation location and method of the fixture based on the actual needs of the work site, and then prepare a three-core cable of Φ8 to Φ14 mm according to the distance from the fixture to the power supply connection.

2. Open the locking screws on the side of the fixture cover, then loosen the compression nut at the cable entry of the fixture. Open the cover and pass the power cable through the compression nut into the internal terminal, connect and secure it as shown in the diagram, and then tighten the cable compression nut and the fixture cover.

3. LED corridor lights are non-enclosed types. If the fixture itself does not light up, generally communicate with the manufacturer for direct replacement or return for repair.

2. Precautions:

1. The power supply must be cut off before disassembling the fixture.

2. It is strictly forbidden to open it while powered.

3. During use, the surface of the fixture will have a certain temperature rise, which is normal; the center temperature of transparent parts is relatively high and should not be touched.

4. When installing the fixture, it should be safely grounded nearby.

The above are the characteristics of LED corridor lights, as well as their installation methods and precautions. Relevant personnel must pay attention to the issues during installation to ensure their personal safety.