What are the main contents of square lighting design

Categories:Industry Information
Author:
Origin:
Time of issue:2018-05-11 14:10
Views:

(Summary description) 　　Square lighting belongs to road lighting and is also an important part of urban lighting projects. The city square is an iconic place in the city. Beautifying the square can not only prompt the image of the entire city, but also reflect the city's culture. The lighting of the square should be designed with reasonable use of buildings from all aspects. Commercial plazas, leisure plazas, etc. in every city are places with large population circulation. Lighting should not only be reasonably designed, but also aesthetic. Leisure Square. It is mainly to provide a place for people to rest, socialize and hold small cultural and entertainment activities. Due to the different ways of people's activities, some areas and time periods are relatively concentrated. The following points should be paid attention to in lighting design: The square is an important place for local cultural display, and lighting The design should reflect the local cultural characteristics. The key points should be highlighted, especially the standard buildings of the square should be highlighted to make it the highlight of the overall environment of the square. The lighting should be moderately bright and dark, and there should be no glare, especially the leisure area should not be too bright. Light poles should not be erected in the square to affect the daytime effect, and lamps and light poles should not hinder pedestrian activities and traffic. Due to the concentration of people, the lamps should be well protected to avoid electric shock and burns for pedestrians. Assembly Square. It is mainly to provide people with places for large-scale gatherings and concerts. The personnel activities are relatively concentrated and the flow of personnel is large. The following points should be paid attention to in the lighting design: The lighting design should be mainly based on high-pole lighting, supplemented by other lighting methods, and the surrounding lighting should be Some garden lights or lawn lights can be appropriately arranged to minimize the light poles that hinder people's activities.

What are the main contents of square lighting design

(Summary description)
　　Square lighting belongs to road lighting and is also an important part of urban lighting projects. The city square is an iconic place in the city. Beautifying the square can not only prompt the image of the entire city, but also reflect the city's culture. The lighting of the square should be designed with reasonable use of buildings from all aspects. Commercial plazas, leisure plazas, etc. in every city are places with large population circulation. Lighting should not only be reasonably designed, but also aesthetic.

Leisure Square. It is mainly to provide a place for people to rest, socialize and hold small cultural and entertainment activities. Due to the different ways of people's activities, some areas and time periods are relatively concentrated. The following points should be paid attention to in lighting design: The square is an important place for local cultural display, and lighting The design should reflect the local cultural characteristics.

The key points should be highlighted, especially the standard buildings of the square should be highlighted to make it the highlight of the overall environment of the square. The lighting should be moderately bright and dark, and there should be no glare, especially the leisure area should not be too bright.

Light poles should not be erected in the square to affect the daytime effect, and lamps and light poles should not hinder pedestrian activities and traffic. Due to the concentration of people, the lamps should be well protected to avoid electric shock and burns for pedestrians.

Assembly Square. It is mainly to provide people with places for large-scale gatherings and concerts. The personnel activities are relatively concentrated and the flow of personnel is large. The following points should be paid attention to in the lighting design: The lighting design should be mainly based on high-pole lighting, supplemented by other lighting methods, and the surrounding lighting should be Some garden lights or lawn lights can be appropriately arranged to minimize the light poles that hinder people's activities.

Categories:Industry Information
Author:
Origin:
Time of issue:2018-05-11 14:10
Views:

Information

　　Square lighting belongs to road lighting and is also an important part of urban lighting projects. The city square is an iconic place in the city. Beautifying the square can not only prompt the image of the entire city, but also reflect the city's culture. The lighting of the square should be designed with reasonable use of buildings from all aspects. Commercial plazas, leisure plazas, etc. in every city are places with large population circulation. Lighting should not only be reasonably designed, but also aesthetic.

njtansuo.com

Leisure Square. It is mainly to provide a place for people to rest, socialize and hold small cultural and entertainment activities. Due to the different ways of people's activities, some areas and time periods are relatively concentrated. The following points should be paid attention to in lighting design: The square is an important place for local cultural display, and lighting The design should reflect the local cultural characteristics.

The key points should be highlighted, especially the standard buildings of the square should be highlighted to make it the highlight of the overall environment of the square. The lighting should be moderately bright and dark, and there should be no glare, especially the leisure area should not be too bright.

Light poles should not be erected in the square to affect the daytime effect, and lamps and light poles should not hinder pedestrian activities and traffic. Due to the concentration of people, the lamps should be well protected to avoid electric shock and burns for pedestrians.

Assembly Square. It is mainly to provide people with places for large-scale gatherings and concerts. The personnel activities are relatively concentrated and the flow of personnel is large. The following points should be paid attention to in the lighting design: The lighting design should be mainly based on high-pole lighting, supplemented by other lighting methods, and the surrounding lighting should be Some garden lights or lawn lights can be appropriately arranged to minimize the light poles that hinder people's activities.

Scan the QR code to read on your phone

Previous: How to improve the use effect of landscape lighting

Next: Several important factors that cannot be ignored in landscape lighting design

Previous: How to improve the use effect of landscape lighting

Next: Several important factors that cannot be ignored in landscape lighting design

What are the characteristics of LED roadway lights? Do you know the installation method and precautions? Take a look!

　　As people's requirements for lamps are getting higher and higher, a new type of lamps called LED lamps are favored by people. LED is a kind of light-emitting diode. As a light source for illuminants, it has high light efficiency and long life. To achieve multi-purpose lighting, and softened, it will not cause dazzling or other uncomfortable reactions, so many public areas will use this kind of light, such as LED roadway lights, because there are many people on the road, so it is necessary to To install soft lamps that will not hurt the eyes, what are the characteristics of LED road lights? Do you know its installation methods and precautions? Let's follow the editor to learn about it. 　　 Features of LED roadway lights: 1. The color purity of LED roadway lamps is high; at present, LED products cover almost the entire visible spectrum range, and the color purity is high. 2. LED roadway lamps have a long life. The actual life of LED is more than 50,000 hours, which is several times or even dozens of times that of general light sources. 3. The light source of LED roadway lamps does not contain mercury, and the light beam does not contain ultraviolet rays. 4. It is solid luminescence, good shock resistance, firm and reliable. 5. It also has the characteristics of energy saving, economical and maintenance-free. 6. LED has strong luminous directionality, high luminous flux utilization rate, and small size, which is easy to design and control light intensity distribution of LED lamps. 7. LED roadway lamps can be powered by DC low voltage, which is safe and reliable. 8. The LED is not limited by the start-up temperature, it can be started temporarily, usually a few ms, and can temporarily achieve full luminous flux output. 　 Installation method and precautions of LED roadway lights: 1. Installation method: 1. First, determine the installation position and method of the lamps according to the actual needs of the work site, and then prepare the corresponding length of Φ8~Φ14 mm three-core cables according to the distance from the lamps to the power contacts. 2. Open the set screw on the side of the upper cover of the lamp, then loosen the compression nut of the cable inlet of the lamp, open the upper cover, and lead the power cables through the compression nut to the internal terminal, and connect according to the method shown in the figure. Fix it, and then tighten the cable compression nut and the upper cover of the lamp. 3. The LED roadway lights are enclosure-free. If the lamps themselves are not bright, generally communicate with the manufacturer for direct replacement or return to the factory for maintenance. 2. Notes: 1. The power supply must be cut off before dismantling the lamp. 2. It is strictly forbidden to open it with electricity. 3. During use, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the center of the transparent part has a high temperature and should not be touched. 4. When installing lamps, the lamps should be safely grounded nearby. The above are the characteristics of LED roadway lights, as well as its installation methods and precautions. Relevant staff must pay attention to the problems during installation to ensure their personal safety.

→

What are the requirements for landscape lighting? This arrangement can get better results!

　　Landscape lighting is designed and created artificially to make it more artistic or aesthetic under the action of lighting, so that ordinary night scenes are full of exotic cultural atmosphere. Landscape lights should be the same color as the environment. Using light for color design is one of the key technologies in architectural design to reflect architectural cultural characteristics, and it has great benefits for architectural lighting. So what are the requirements for landscape lighting? It's going to do it! Take a look! What are the requirements for landscape lighting? 1. Some important public buildings, historical relics, commercial buildings, square sculptures, or some special road signs (LANDMARK), bridges or MRT stations and other transportation facilities can be landscaped at night, so that the city night scene can be illuminated in addition to neon lights. There are different colors. 2. After reasonable planning, highlighting the landmark buildings, illuminating the road network, the outline of the city can be seen at night. Every city has its own unique cultural atmosphere, and it must be designed in a targeted manner. It cannot blindly imitate and imitate. It is always the shadow of others and has no bright spot. 3. A complete lighting project should have changes in spring, summer, autumn and winter, not just some important festivals. This reflects the unique charm and cultural atmosphere of a city! Landscape lighting to do this: 1. With the continuous development of urban planning and construction and the continuous improvement of high-tech levels, the economic development of cultural tourism industry lighting projects has enriched its connotation. The lighting project of the scenic spot not only stipulates the light intensity, chromaticity, color rendering index, and the visual impact of the natural environment, which is pleasing to the eye, but also changes with the change of the scenery. 2. It has important practical significance to ensure the normal operation of lighting equipment in major cities and achieve better lighting effects. It mainly includes scientific management methods and legal management. Using modern control technology to carry out scientific management, not only to ensure the lighting rate and equipment integrity rate, but also to be economical and practical to achieve better lighting effects. 3. The lighting design of the building lighting project should proceed from the aesthetic point of view of the project building. In the design plan, the facade of the main building and the sub-building should be defined, and different actual lighting effects should be used to clarify the project sequence. The practical effects of various aspect ratios and different distances are more abundant. The above is what are the requirements for landscape lighting? What it wants to do, if you want to know more information, you can pay attention to our later article updates to learn. Note: Some pictures are from the Internet, if there is any infringement, please contact to delete!

→

What are the characteristics of landscape lighting projects? How should it become environmentally friendly?

　　Now many places are vigorously building landscape lighting projects, because it can not only make the night scene of the city more beautiful, but also attract more tourists to visit through the construction of night scenes, etc. What are the needs of this project? What characteristics are we going to understand? I will give you a detailed introduction in this article. In the process of building a landscape lighting project, it is also necessary to pay attention to making the landscape lighting project more environmentally friendly, so as to meet the current environmental protection concept of low carbon emissions! What are the characteristics of landscape lighting? 1. The construction of landscape lighting in a city is a must, it can bring people spiritual pleasure and satisfaction. For example, lights can create and reshape regional landscapes, making night and day bloom different and wonderful, bringing people great spiritual enjoyment and stimulating the development of the local economy. 2. However, as an important element closely related to people's lives, landscape lighting cannot be done blindly, but must be targeted. Lighting is mainly used for services, serving the economy, cities and even various formats. Of course, in the final analysis, it is to serve people. Therefore, lighting needs to be people-oriented and serve various needs caused by people. 3. Night economy and night travel have great development prospects in the future. Therefore, it is an inevitable trend to "light up" cities and landscapes and create business cards for nighttime economy. As a particularly targeted customized design process, cultural and creative lighting is more conducive to creating independent IP and representative projects, and the prospects are promising. 4. As for the breakthrough in the future development of landscape lighting, the editor believes that we should start from three aspects. One is to return to the essence, do things according to the rules of industry development, and do not blindly expand the scale; Make planning and construction more reasonable and effective; the third is to practice internal skills diligently to consolidate the foundation. How can landscape lighting projects become environmentally friendly? 　　1. Strengthen public consultation to realize the unity of top-level design and insisting on asking and considering the people 　　Landscape lighting needs to follow the people-oriented design concept, not blindly pursuing beauty and ignoring the impact on people's daily life, especially the residential area and its surrounding landscape lighting should be considered and designed with the comfort of living as the center, and landscape lighting should be Use soft and low color temperature lamps to avoid harsh light coming directly into your eyes. In functional lighting planning and landscape lighting planning, more emphasis is placed on citizen experience. 　　2. Implement dark night protection and lead the ecological restoration and dark night economy at night　　 It is helpful for ecological restoration at night, and the lights of landscape lighting cannot break the laws of nature. For observatories with specific requirements, the theme of observing the night environment and the dark environment should be based on the location and environment of the illuminated scene to determine the location, illumination angle, quantity and arrangement of lamps to avoid interfering light and glare, and reduce light pollution. And the starry sky at night. To sum up, the above is the relevant knowledge about landscape lighting project introduced by Xiaobian. When designing this project, you need to operate according to the knowledge suggested by Xiaobian!

→