Mining Support Lamp Mainly composed of an "upper lamp head" and a "lower lamp tube." It incorporates a combined energy-saving electronic ballast. A baffle structure is added, and the lower seam has a cavity structure with a growth section. Multiple through-holes are arranged in a ring around the outer wall of the growth cavity for multiple heat dissipation and insulation, ensuring the normal service life of the energy-saving lamp.

　　What are the advantages of mining support lamps?

　　1. High Energy Efficiency: Energy saving is environmentally friendly and pollution-free. DC drive, ultra-low power consumption, electro-optical power conversion efficiency is close to 99%, and the energy saving is more than 80% compared with traditional light sources under the same illumination effect.

　　2. Long Lifespan: Referred to as a long-life lamp, meaning the lamp does not go out. Solid-state cold light uses epoxy resin encapsulation, and the lamp body has no loose parts. It does not have the disadvantages of flammability, heat sink, and light decay. The lifespan can reach 60,000 to 100,000 times, more than ten times that of previous lamps.

　　3. Multiple Variations: LEDs can utilize the principle of the three primary colors of red, green, and blue. Under the control of computer technology, the three colors have 256 levels of grayscale, which can be arbitrarily mixed to produce 256×256×256=16,777,216 colors. Different color combinations can be changed to achieve colorful dynamic changes and various images.

　　4. Environmental Protection: Better environmental protection benefits, no ultraviolet and infrared rays in the spectrum, no thermal radiation, less glare, recyclable waste, no pollution, no mercury, cold light, safe to touch, it is a typical green lighting.

　　5. High Technological Content: Compared with monotonous light emission, LEDs successfully integrate low-voltage microelectronic products such as computer technology, network communication technology, image processing technology, and embedded control technology. Therefore, it is also a digital information product, a "high-tech" technology of semiconductor optoelectronic devices, with features such as online programming, unlimited upgrades, and flexibility.

　　In addition to the necessities of water, air, and food, light affects people's work and rest, leading to a life of working at sunrise and resting at sunset. Until 1879, Edison invented the light bulb (incandescent lamp). When current enters the circuit, the heat effect through the filament causes the incandescent lamp to emit continuous visible light and infrared rays. This phenomenon can be detected when the temperature rises to 7000K. Due to the high working temperature, most of the energy is absorbed in the form of infrared radiation. At the same time, due to the high temperature and rapid evaporation, the service life is greatly shortened, about 2000 hours, and the luminous efficiency is about 12 (Lm) per watt. So now we have these energy-saving lamps. Even in mines, there is no need to worry about needing constant power generation. The long lifespan greatly improves the work efficiency of workers.

　　Mining support lamps are mainly used for lighting in fully mechanized mining faces in coal mines where there is a risk of gas and coal dust explosions, and are used in conjunction with hydraulic supports. They can also be installed in coal mine roadways, caverns, etc., as wall lamps or ceiling lamps. They are lighting fixtures used in mining faces in coal mines.

Telephone:18914779750

Fax: 025-84199977

E-mail:njtansuo@163.com