搜索
imgboxbg

Product Display

Specializing in R&D and production of LED optoelectronic products and visual inspection instruments

PRODUCTS

Product Center

Classification:Mine explosion-proof lamps

DGS18/127(A) Explosion-proof roadway light

Consult:+86 18914779750
DGS18/127(A) Explosion-proof roadway light
Product description
I. Overview
1. Product Features

●The effect of power saving is obvious: under the same brightness, it saves 90% of electricity than ordinary incandescent lamps and 65% of electricity than energy-saving lamps.  
●Long lifespan: The average lifespan of the LED light source can reach 50,000 hours, avoiding frequent replacement of bulbs or lamps and achieving maintenance-free.
●Environmental protection: no pollution, no ultraviolet radiation, is a new generation of green lighting.
Wide operating voltage range: the voltage changes within the range of 65~264V, the lamps work normally, and the brightness does not change.

It effectively solves the problem of large and easy-to-burn lamps in downhole voltage fluctuations.

●The product takes the lead in researching a new generation of heat conduction structure, and the lamp has achieved a good heat conduction effect.

2. Main purpose and scope of application

The main purpose:It is used for safety lighting in flammable and explosive environments such as gas and coal dust underground in coal mines, and can also be used for lighting in chemical, cement plants, flour mills and other places.

Scope of application:It is suitable for the lighting of all the alleys, chambers, underground parking lots and other places in the coal mine.

3, the use of environmental conditions

1) Ambient temperature: -20℃~+60℃;

2) The relative humidity of the air is less than or equal to 95% (+25°C);

3) It is suitable for places where there is a danger of gas and coal dust explosions in coal mines.

4. Model composition and its representative meaning

The roadway light model is compiled according to MT211-2005:

5 Safety Requirements

1) Product explosion-proof type: This product adopts explosion-proof type, and the explosion-proof mark is: ExdⅠ

2) This product is equipped with a safety warning sign, and live operation is strictly prohibited.

3) It is strictly forbidden to disassemble the miner's lamp or replace the parts in the underground, and the maintenance and repair of the miner's lamp must be carried out on the ground;

4) It is strictly forbidden for non-professionals to maintain and repair miner's lamps;

2. Structural characteristics and working principle

1. Structural features: The roadway light is composed of power supply cavity, transparent tube cover, light source body, back cover and other components. The structure of the roadway light is shown in the figure.

A Compression nut B Power cavity C Transparent tube cover D Light source body E Back cover

2. Working principle

The roadway light adopts LED light source, AC 127V input voltage, and explosion-proof lamp structure. After the lamp is assembled and installed, turn on the power supply, the LED light source will light up, and the lamp will work.

3. Main technical performance parameters

The basic parameters of explosion-proof LED roadway lights are shown in Table 1

Table 1 Basic parameters of explosion-proof LED roadway lights

sequence

No

ginseng

number

parameter value

one

bit

prepare

Note

 DGS18/127L(A)

1

Voltage

AC65-264V

V

Standard 127V

2

rated power

18

W

 

3

Illuminance

≥85

Lx

Test distance (row marked ≥10)

4

color temperature

4500--7500

K

 

5

Incoming Cable Specifications

Φ8~Φ13

mm

 

6

Outline maximum size

697×107×119

mm

 

7

Outline maximum size

4.0

Kg

whole light

8

energy saving 65-90% energy saving than fluorescent lamps and incandescent lamps

 

 

Online Message

If you are interested in us, welcome your message, we will reply you in time!

Username used for comment:
客户留言
Description:
五星内燃机配件

Copyright © 2021 Nanjing Tansuo Optoelectronics Co., Ltd. All rights reserved     Powered by: www.300.cn  |   苏ICP备07006102号-1