搜索
imgboxbg

Product Display

Specializing in R&D and production of LED optoelectronic products and visual inspection instruments

科思
/
/
/
/
Explosion-proof platinum resistance (using imported platinum resistance elements)
PRODUCTS

Product Center

Classification:Temperature and Humidity Measuring Instrument

Explosion-proof platinum resistance (using imported platinum resistance elements)

Consult:+86 18914779750
Explosion-proof platinum resistance (using imported platinum resistance elements)
Product description

 Industrial flameproof platinum resistance is a kind of temperature sensor. It is widely used in industrial automatic control systems. Through the temperature sensor, the temperature parameters of the control object can be turned into electrical signals, which can be transmitted to display, recording and adjustment instruments, and the system can be detected, adjusted and controlled. In chemical plants and production sites, there are often various flammable and explosive chemical gases and vapors. If ordinary platinum resistors are used, it is very unsafe, and it is very easy to cause environmental gas explosions. Therefore, explosion-proof thermocouples must be used as temperature sensors in these occasions. The explosion-proof platinum resistance products produced by our factory are suitable for places with explosive gas hazards in the range of d II BT4~d II CT6 temperature groups. The explosion-proof thermocouple adopts imported elements as temperature sensing elements, and its technical performance conforms to ZBY301-85 industrial platinum electric technical conditions and indexing table. At the same time, the products meet the general requirements of GB3836.1-83 and GB3836.2-83 standards for explosion-proof electrical equipment for explosive environments.

 

  1. Main technical indicators

Range specification

model Graduation number Temperature measurement range °C Accuracy class Allowable deviation △ t ℃

WZP 
WZP 2 
WZPK 
WZPK 2

PT100

-200~500

A 级

±(0.15+0.002|t|)

B 级

±(0.30+0.005|t|)

 


 Note: "t" is the absolute value of the actual temperature of the temperature sensing element, and the double platinum resistance resistance only supplies the B-level thermal resistance. The maximum current that can pass through the platinum resistance resistance is not more than 5mA.

 

2. Explosion-proof type and grade group

Explosion-proof group: d II BT4 or d II CT4; d II BT6 or d II CT6

Shell protection grade: IP54

 

3. Principle structure

The structure and principle of explosion-proof thermal resistance and assembled thermal resistance are basically the same. The difference is that the junction box (shell) of the explosion-proof product adopts a special explosion-proof structure in design, and the junction box is made of high-strength aluminum alloy die-casting. And it has sufficient internal space, wall thickness and mechanical strength, and the thermal stability of the rubber sealing ring conforms to the national explosion-proof standard. Therefore, when the explosive gas mixture inside the junction box explodes, its internal pressure will not destroy the junction box, and the heat energy generated therefrom cannot be diffused outwards - explosion.

Since the product adopts the above-mentioned special explosion-proof structure, the product can be used in the range of explosion-proof temperature group from d II BT4 to d II CT6. As long as the user strictly follows the product use rules, the product can achieve reliable explosion-proof effect.

Description of categories, classes and temperature groups of electrical equipment:

Electrical equipment is divided into two categories: Class I - electrical equipment for underground coal mines;

Class II - Electrical Equipment for Factory Use

 

4. Explosion-proof grade

The explosion-proof grade of explosion-proof thermal resistance is rigid, and its maximum safety clearance for explosive gas mixtures is divided into three levels: A, B, and C.

 

5. Temperature group

The temperature group of the internal resistance of the flameproof tropical belt is divided into six groups T1~T6 according to the highest surface temperature of its exposed part.

 

  6. Types and specifications of explosion-proof thermal resistance

 

category model Graduation number temperature range °C Protective tube
Material
Thermal response time t0.5s Nominal pressure Mpa Structure Specification Explosion-proof grade

Overall length L (mm)

Insertion depth l (mm)
Platinum thermal resistance

WZP-24SA

PT100

-200~500

1Cr18Ni9Ti stainless steel
or 0Cr18Ni
12M02Ti

≤90

10

Flameproof junction box fixed thread installation M27*2 flameproof junction box fixed flange installation

250 350 400 450 550 650 900 1150

100 200 250 300 400 500 750 1000

d IIBT4 
d II BT6 或
d II CT4
d II CT6

WZP2-24SA

WZP-44SA

6.4

WZP2-44SA

WZP
-64S 
WZP2

1Cr18Ni9Ti

30

Conical protection tube M33*2

250 350 450

100 200 300

 

 

Online Message

If you are interested in us, welcome your message, we will reply you in time!

Username used for comment:
客户留言
Description:
五星内燃机配件

Copyright © 2021 Nanjing Tansuo Optoelectronics Co., Ltd. All rights reserved     Powered by: www.300.cn  |   苏ICP备07006102号-1